-40%
for Milwaukee 2601-20 (B28C) 1/2
for Milwaukee 2601-20 (B28C) 1/2
for Milwaukee 2601-20 (B28C) 1/2
for Milwaukee 2601-20 (B28C) 1/2
for Milwaukee 2601-20 (B28C) 1/2

for Milwaukee 2601-20 (B28C) 1/2" Compact Driver Drill Carbon brush

$ 4.47

Availability: 43 in stock
  • Condition: New
  • Return shipping will be paid by: Seller
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • MPN: Does Not Apply
  • Refund will be given as: Money Back
  • Restocking Fee: No
  • Brand: Unbranded/Generic

    Description

    This part replaces obsolete part 14-46-2012 and 22-22-1640.
    Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that’s operating intermittently. New brushes can restore a motor’s electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
    This assembly holds carbon brushes around the armature to provide stable contact. This assembly consists of: plastic holder ring, four (4) metal brush holders with springs and four (4) carbon brushes with lead wires attached.
    Compatible with these models:
    Milwaukee
    2601-20 (B28B) 1/2" Compact Driver Drill
    2601-20 (B28C) 1/2" Compact Driver Drill
    2650-20 (B55B) 18 Volt 1/4" Hex Impact Driver
    2651-20 (B77B) 18 Volt 3/8" Square Impact Driver
    2652-20 (B78B) 18 Volt 1/2" Square Impact Driver
    2602-20 (SER C15A) M18 1/2" Compact Hammer Drill
    2601-20 (SER B28D) 1/2" Compact Driver Drill
    2601-059 (SER D36A) 1/2" Compact Driver Drill
    2601-059 (SER D36C) 1/2" Compact Driver Drill
    2602-20 (C15B) M18 1/2" Compact Hammer-Drill
    2650-20 (B55C) 18 Volt 1/4" Hex Impact Driver
    2602-20 (SER C15D) M18 1/2" Compact Hammer Drill
    2601-21 1/2" Compact Driver Drill
    To replace this assembly you would need a screwdriver.
    1 First remove screws holding the cover together
    2 Carefully separate housing to gain access to armature and brush holder
    3 Disconnect the wires
    4 Remove the screws holding brush card assembly
    5 Remove old brush holder and install the new assembly
    6 Reassemble and test your tool