-40%
ETC UFR2-LV Dual-Zone DMX Relay with 0-10V
$ 130.94
- Description
- Size Guide
Description
The ETC UFR2-LV Unison Foundry® 0-10V Dimming Controller offers DMX controlled, fully-rated 20-Amp relays with fully isolated 0-10V dimming for direct control of compatible LED drivers and fluorescent dimming ballasts. This style of dimming controller can be mounted to electrical junction boxes.The UFR2-LV Controller provides two outputs of control that can be wired to individual fixtures or used for zone control. Each output can be configured to a separate DMX address, or both outputs can be controlled in unison by setting the 0–10V Controller to single-channel mode. This model allows you to control connected loads from any DMX control device. Configure the 0–10V Controller either remotely via RDM (using a tool like ETC Net3 Concert) or locally on the controller.
Applications for the ETC UFR2-LV:
Arena and stadium suites
Office buildings
Conference and meeting rooms
Healthcare facilities
Houses of worship
Classrooms
Hospitality and restaurants
Retail
ETC UFR2-LV Features:
Switched power control of two circuits with 0-10V dimming
20A fully-rated relays for use with general purpose, tungsten, fluorescent and LED loads
Supports plug loads
120/277VAC power input
DMX controlled and RDM configurable
ETC UFR2-LV Specifications:
Ambient Environment:
For indoor use only.
Rated for plenum use.
32°F to 104°F (0°C to 40°C) operating temperatures in 5–95% non-condensing humidity.
Electrical Specification:
The 0-10V Controller Supports:
Power input 120–277VAC, 60 Hz
Maximum load rating is 20A (total connected load)
NOTE: The maximum load on the 0-10V Controller can be split between the two relay outputs in any combination required for the installation, but cannot exceed 20A total connected load for the controller.
Independent control for 0-10V fluorescent ballasts and/or LED drivers, each is capable of sinking 100mA
Supported Load Types (all voltages):
20A fully-rated relay for use with general purpose, tungsten, fluorescent, and LED lighting loads.
Compliance:
UL and cUL listed
Conforms to UL 916 (Energy Management Equipment) and UL 2043 (Plenum rated)
Physical:
Size (H x W x D): 2 x 3.5 x 3 in
Weight: 0.75 lbs