-40%
ETC Sensor Rack D20 Dual Channel Dimmer Card Module DC
$ 35.89
- Description
- Size Guide
Description
ETC - Electronic Theater ControlsD20 Dual-Channel 20A Dimmer
ETC Sensor Rack D20 Dual Channel Dimmer Card Module DC
The Standard Dimmer Module is designed for use in both Sensor+ and Unison Dimming Series modular rack enclosures.
Standard Dimmer Modules provide cost-effective digital forward phase angle dimming for standard loads such as
incandescent,
low voltage, quartz,
neon, cold-cathode and 2 and 4-wire fluorescent ballasts.
The patented high-density, dual modules feature modular installation and removal, fully magnetic circuit breakers and standard risetime toroidal filters.
APPLICATIONS
Incandescent lighting
Low voltage lighting
Quartz lighting
Neon lighting
Cold cathode lighting
2-wire fluorescent ballast
4-wire fluorescent ballast
FEATURES
Two 2.4kW dimmers per module
Standard risetime toroidal filters
High-density modular assembly
Die-cast aluminum chassis
Fully magnetic circuit breakers
SPECIFICATIONS
UL and cUL Listed for continuous duty at 100% of rated load
PHYSICAL
Modular plug-in assemblies
Cast aluminum chassis, finished with textured epoxy paint
Keyed to prevent insertion in inappropriately rated rack positions
CIRCUIT BREAKERS
20x inrush current rating
125%, 10-120 seconds, must-trip rating
Rated for 100% switching duty applications
Fully magnetic to eliminate nuisance tripping
RATINGS
100,000A Short Circuit Current Rating Rating (SCCR)
Modules withstand hot-patching of cold loads up to full rating
POWER DEVICE
Sealed, patented assembly
Field replaceable with screwdriver
Two back-to-back SCRs per circuit
One control LED per circuit
4000V isolation between control and power components
FILTERING
High quality toroidal filters
350µS risetime (risetime measured at full load, at worst case firing angle (90 degrees), from 10-90% of output wave form
DIMMER RANGE
Incandescent, low voltage dimming range 100-0%
Dimming range of 2 and 4-wire fluorescent ballast is dependent on lamp ballast combination. Contact ETC for range verification
Sizing of neon transformer used in dimming applications should be 1.5x greater than size used in non-dimming application
Made in USA
Item 762 A - J